Laser cutting in Sydney is a non-contact process in which uses a light beam to cut materials. This results in a precise, high quality product.
The process basically works by directing the light beam through a nozzle and aiming it at the desired material. A combination of heat and pressure creates the divide.
Although this may be a process you are familiar with, you probably don’t know much about it. However, the method is far more interesting than you may have first thought.
Keep reading to find out some interesting facts about laser cutting in Sydney.
1: It’s older than you think
Many people believe that laser cutting in Sydney is a new technology; however, this is not the case. In reality, this process has been around since the 1950’s.
Interestingly the first machine to provide engraving services was created in the 1950’s, however it was not until the 70’s that it was possible to use this in manufacturing. Due to this, it took time for the process to become accessible to the masses and therefore gain popularity.
Laser cutting in Sydney only really became popular after the development of the micro-computer.
2: The intensity matters
The intensity of the light beam determines the thickness that can be cut; basically the more intense the beam, the stronger it is. Therefore, you will need a stronger light intensity to cut through thicker materials; if the intensity is low you will only be able to cut through thin sheets.
Laser cutting in Sydney is usually measured in terms of power, for example 1,000 watts or 1k watts. This is calculated by the total energy emitted in the form of laser light per second.
3: It is good for the environment
Unlike many other methods of cutting, laser cutting in Sydney is environmentally friendly. This is basically because it is a sustainable method of cutting.
The use of light beams for cutting offers the most effective use of materials, and therefore minimises any excess waste. This process also restricts harmful fumes to a specific chamber which are then carefully ventilated.
Due to the nature of the process, it does not require any toxic chemicals. Furthermore, it also doesn’t leave behind any residue after the task is complete.
4: The process can be used for engraving
The process of laser cutting in Sydney can also be applied to engraving. Interestingly, this process is much cheaper and faster than many other forms of engraving and can be used on many different items. However, the results are also flawless and clean.
In simple terms, light beam engraving is a cost effective, fast and simple method, which will leave you with high quality results.
5: There are lots of applications
Since laser cutting in Sydney first began in the 1950’s there have been multiple technological advancements. There only used to be one main purpose for this process and not much was known about the impact the density of the beam had on the application. However, similar to technology, this process has advanced.
In fact, there are now 25,000 high power beam applications and many different types of light beams have been developed.
Due to the large range of light beams available, it is now possible for the process to be used on multiple different materials. Some of these materials include:
6: The light lens has an impact
The focal length of the light beam actually plays a big part in the quality and therefore the outcome of the product.
Interestingly, a lens with a short focal point produces a small spot and a short depth of focus. This essentially results in a higher quality divide and also shortens the time it takes to cut the material.
Essentially, the type of light beam lens you use depends on the material and the quality you are hoping to achieve.